Technology PowerPoint Presentation

Slide 1 -

Intel® vPro™ Technology Intel® Active Management TechnologySetup and ConfigurationDell Optiplex 755 towerSmall Business Mode

Slide 2 -

2 Legal Disclaimer Intel Confidential – Intel Internal Use Only Copyright © 2008 Intel Corporation. All rights reserved. Intel, the Intel logo, Intel. Leap ahead., the Intel. Leap ahead. logo, Intel vPro, Intel Active Management Technology, and Intel Core 2 Duo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Other names and brands may be claimed as the property of their respective owners.

Slide 3 -

3 Table of Contents Client Information Setup and Configuration

Slide 4 -

4 Client Information The following Setup and Configuration instruction as based on an Intel® Desktop Board. Depending on your motherboard manufacturer and firmware version, you may have a different interface or experience then what is listed in this presentation. Regardless, the following information should give you the basic steps for configuring any Intel® vPro™ client in Small Business mode.

Slide 5 -

5 What is Setup and Configuration? Setup and Configuration is the process that makes Intel® Active Management Technology features accessible to management applications. Before management applications can access an Intel® Active Management Technology device, the device must be populated with various configuration settings such as usernames, passwords, network parameters, Transport Layer Security (TLS) certificates (applies to Enterprise Mode), and keys necessary for secure communications.

Slide 6 -

6 Setup and Configuration

Slide 7 -

7 Power on the Intel® vPro™ client Press F12 Select: System Setup Setup and Configuration

Slide 8 -

8 Select:MEBx Hotkey Select On To exit Setup, press:Esc SelectExit Setup and Configuration

Slide 9 -

9 During Reboot press:CTRL-P Setup and Configuration

Slide 10 -

10 You are required to change the Intel® Management Engine Password This is only required for initial setup and Configuration Setup and Configuration

Slide 11 -

11 Enter the password:admin This is only required for initial setup and Configuration Setup and Configuration

Slide 12 -

12 Select:Change Intel® ME Password This is only required for initial setup and Configuration Setup and Configuration

Slide 13 -

13 Password needs to be at least 8 characters, using upper and lower case letters, numbers, and symbols. Example: Acmec0rp! Setup and Configuration

Slide 14 -

14 Type your password to Verify. Setup and Configuration

Slide 15 -

15 This is the Intel® Management Engine main screen where you can make changes to the: Intel® Management Engine Configuration Intel® Active Management Technology Configuration Change Intel® Management Engine Password Setup and Configuration

Slide 16 -

16 Select:Intel® ME Configuration Setup and Configuration

Slide 17 -

17 Press Y to Continue Setup and Configuration

Slide 18 -

18 Select:Intel® ME Firmware Local Update Qualifier Setup and Configuration

Slide 19 -

19 Set to:[*] ALWAYS OPEN Setup and Configuration

Slide 20 -

20 Select:Intel® ME Features Control Setup and Configuration

Slide 21 -

21 Select:Manageability Feature Selection Setup and Configuration

Slide 22 -

22 Set to:[*] Intel® AMT Setup and Configuration

Slide 23 -

23 Select:Return to Previous Menu Setup and Configuration

Slide 24 -

24 Select:Intel® ME Power Control Setup and Configuration

Slide 25 -

25 Select:Intel® ME ON in Host Sleep States Setup and Configuration

Slide 26 -

26 Set to:[*] Desktop: ON in xxx Select the desired mode Setup and Configuration

Slide 27 -

27 Select:Return to Previous Menu Note: Depending on the changes made, your system may restart. If this occurs, please re-enter the setup by pressing when the system completes the restart. Setup and Configuration

Slide 28 -

28 Select again:Return to Previous Menu Setup and Configuration

Slide 29 -

29 Select:Intel® AMT Configuration Setup and Configuration

Slide 30 -

30 Select:Host Name Setup and Configuration

Slide 31 -

31 Insert Windows computer name. Our example is:vpro-pc1 set computer name as desired Important Note: In DHCP mode: The computer name must match the computer name in Windows In Static IP mode: The computer name must be different than the computer name in Windows. TCP/IP Configuration will be discussed in the upcoming slides. Setup and Configuration

Slide 32 -

32 Select:TCP/IP Setup and Configuration

Slide 33 -

33 The Network Interface should be Enabled by default Press N to NOT Disable Network Interface Setup and Configuration

Slide 34 -

34 DHCP should be Enabled by default Press N to NOT Disable DHCP Setup and Configuration

Slide 35 -

35 Set the Domain name. Our example is:vprodemo.com Setup and Configuration

Slide 36 -

36 Select:Provisioning Model Setup and Configuration

Slide 37 -

37 By Default should be set to:Intel® AMT 3.0 Mode Press N to NOT Change to Intel® AMT 1.0 Mode Setup and Configuration

Slide 38 -

38 By Default should be set to:Enterprise Press Y to Change to Small Business Setup and Configuration

Slide 39 -

39 After Provisioning to Small Business the Intel® AMT Configuration menu will change Setup and Configuration

Slide 40 -

40 Select:VLAN Setup and Configuration

Slide 41 -

41 By default VLAN is set to Disabled Press N to NOT Enable VLAN Setup and Configuration

Slide 42 -

42 Select:SOL/IDE-R Setup and Configuration

Slide 43 -

43 Press Y to Continue Setup and Configuration

Slide 44 -

44 Set Username & Password to:[*] Enabled Setup and Configuration

Slide 45 -

45 Set Serial Over LAN to:[*] Enabled Setup and Configuration

Slide 46 -

46 Set IDE Redirection to:[*] Enabled Setup and Configuration

Slide 47 -

47 Select:Secure Firmware Update Setup and Configuration

Slide 48 -

48 Set to:[*] ENABLED Setup and Configuration

Slide 49 -

49 Select:PRTC Setup and Configuration

Slide 50 -

50 Can usually leave blank but if different then shown, change PRTC to:YYYY:MM:DD:HH:MM:SS Setup and Configuration

Slide 51 -

51 Select:Idle Timeout Setup and Configuration

Slide 52 -

52 Normally leave unchanged but if not 1 change to:1 Setup and Configuration

Slide 53 -

53 Scroll Down and Select:Return to Previous Menu Setup and Configuration

Slide 54 -

54 To Exit the Main Menu Select:Exit Setup and Configuration

Slide 55 -

55 Press Y to Confirm Exit Once you Confirm Exit the system will restart and your settings will be in effect. Setup and Configuration